tools used
sater gun
flux
red wierd
it makes the guitar work i wanted to make it look good it work i think
it allso realiy hot and it bruns
Category: Uncategorized
week 10
i used a 1000 gert and steal wool to breing old frets back to life and had for got to put the blue tape on my nick so now it going to rust i think it will come out some day but i dont know.
8 week
i started with shaping the body of the guitar and i had to push
on the file so hard that i thought i was about to break it
Tools used
Files
File 1 very ruff file
File 2 some what ruff
Lile 3 not at all that ruff file 4/3 it was a mix of the files all in one it was ruff on one side and so what ruff on the other .
Then i used sand paper on the back and frunt side of the guitar.
Like a 120 gert and a one 140 .
Then i used a power weel to make mos of the dents in tthe wood smoth.
week 8
This is the neck of my guitar with a nice finish.
I used sandpaper with a 140 to 250 to 2000 grit to sand the neck.
This week I also learned how to press frets.
This post has been made by Shooting Star!
week7
week 6
wood clamp
i did not know how much sanding it wood take
week 5
i used the sand table and hand sand paper
this is a day affter glueing my frect borad
week 4
i used wood glue
and a ruberband
The Build of my Guitar
The tools that I used this week were a sanding brick, and a measuring tool.
This week I learned that it needs a lot sanding and smoothing. I didn’t think that a fret board needed to be sanded so much.
Building My Guitar
This week I accomplished
neck of my guitar,
and I got my body sanded down
as smooth I can get it.
I learned that there are more
then one type of sand paper. For example,
120 is really rough,
400 is so smooth and
220 is in the middle.
The tools I used were, a
sanding block,
sanding board,
double sided tape and
120 grit sand paper.
dustin guitar 